Seismic data

Latest plots

I operate three stations on the Raspberry Shake seismic network, R4989 in Orono, ME, R35E7 in Poland, ME, and RCB43 in Williamstown, MA, USA. I also maintain the University of Maine, Orono Seismometer for the New England Seismic Network.
Browse the data archive.

All three Raspberry Shake geophones, and the UMO seismometer, are located in the seismically quiet New England region of the United States. The UMO seismometer is located in the University's seismic vault in Orono, ME, on large glacial boulder pavement close to bedrock. R4989 is located on glacial outwash sediments, an unknown distance from bedrock. R35E7, the station in Poland, ME, is located on the carapace of a glacial drumlin, likely within two meters of bedrock. RCB43 is located on fluvial terrace and glacial Lake Bascom sediments, likely ~2-4m from bedrock. Stations further from bedrock are much more sensitive to surface wave noise from things like passing vehicles. Small seismic events have been observed nearby, and major earthquake events (magnitude 6.5+) from around the world are detected at all of these stations.

Availability plot for today, 2018/12/17

Data availability plot

Plots are updated every ten minutes. New day's plots may not be available between 00:00 and 00:15 UTC. All three Raspberry Shake stations are located in basements about 50-100 feet from residential streets. Vehicles driving by at speed account for a large portion of the spikes seen in the data. Other potential sources of noise include washer/dryer vibration, indoor foot traffic, and cars entering and exiting the driveway. In the winter, snowplow noise may be the largest source of vibration detected at these stations on a given day. During the warmer months, lawnmower noise may be evident as well. The anthropogenic noise sources generally fall in the 10-20Hz range of the frequency spectrum as observed at this station. Earthquakes, should they be detected, will likely cover a larger (and lower) portion of the observable spectrum than the rest of the noise sources.

Plots rendered at 2018/12/17 13:06:06 UTC.
Page loaded at 2018/12/17 13:08:34 UTC.

Plot selection

NE.ORNO - Orono, Maine || AM.R4989 - Orono, Maine || AM.R35E7 - Poland, Maine || AM.RCB43 - Williamstown, Massachusetts
Currently viewing plots for: NE.ORNO.00.HHZ
Search for a specific time and location in the data archive.
Recent earthquake catalog.

Spectrogram of the past five minutes (unfiltered):

A plot of energy density at given frequencies over time. Spectrogram z-axis (color) units are dimensionless.
Spectrogram plot

Low frequency bandpass (0.7-2 Hz for RShakes, 0.03-0.1 Hz for broadbands):

Spectrogram plot

24 hr helicorder plot (UTC):

Helicorder plot

Low frequency bandpass helicorder plot (good for observing faraway quakes):

Helicorder plot of 0.7-2 Hz band

Seismicity maps:

East coast earthquakes, last 30 days

East coast earthquakes, last 30 days

Local seismicity rate by week:

East coast seismicity rate, last 30 days

More info

These plots are made with a combination of ObsPy and Matplotlib formatting. The spectrogram above scales based on the density of energy at the given frequency, based on a moving window with an overlap of 0.9/1. The helicorder plot resets every day at 0000hrs UTC. Traces plotted on the helicorder are scaled down by 800 and 70 respectively for readability, although this is subject to change as I get more familiar with the signatures of environmental noise that the geophone picks up.

RCB43 was moved to Williamstown, MA On December 21, 2017. Prior to that, it was located in West Poland, ME for the summer and fall of 2017, and Greenwich, CT, near the downtown area before that. On December 17, 2017, it was replaced in West Poland by R35E7, a model with a newer digitizer board and three orthogonal geophone axes instead of one.

R4989 replaced R06AC, which was flooded on January 15, 2018. R4989 has moved locations due to vault siting but is now located in eastern Orono, ME, 2 mi southwest of the University of Maine's NE.ORNO broadband station, co-operated by the UMaine School of Earth and Climate Sciences and the New England Seismic Network (network code NE). NE.ORNO is now operational again after several years of inactivity due in part to the folks at Raspberry Shake.